Landis is now bringing award-winning design-build expertise to Annapolis

Lor

When Do You Need an Architect? A Guide to Planning Your Renovation

Learn when a home renovation needs an architect, what they assess before design begins, and how DC-area permits, zoning, and historic review affect your plans.

Key Takeaways

  • When can you renovate without an architect? A qualified remodeling contractor can often handle cosmetic updates and like-for-like replacements. Bring an architect in early for additions, major layout changes, or structural work.
  • Your home's existing structure shapes what's possible. Before designing a renovation, an architect evaluates framing, load-bearing walls, plumbing, stairs, and other conditions that can affect the plan.
  • Local regulations can change your renovation plans. Zoning, building permits, and historic preservation requirements vary across Washington, DC, Maryland, and Northern Virginia.
  • The right project team makes a difference. Architects, builders, and design-build firms offer different approaches to planning and construction. Understanding those differences can help you choose the best fit for your renovation.

Renovating a home often starts with a vision. Maybe you want to open your kitchen to the dining room, turn an unused attic into a primary suite, or add a family room at the back of your home. Before you get too far into planning, there's an important question to answer: Do you need an architect for your renovation?

If you’re changing finishes or replacing cabinets and fixtures in the same locations, an experienced remodeling contractor can often handle the work. If you’re adding space, reworking several rooms, or changing the structure, bring an architect into the conversation early. Depending on the scope and where you live, your permit application may also require drawings signed and sealed by a licensed architect or engineer.

Across the Washington, DC area, the way an older home was built can shape what’s possible in a renovation. A historic house in Georgetown, a Colonial Revival home in Bethesda, and a Craftsman bungalow in Arlington each bring different considerations, from how the floors are supported to which original details are worth preserving.

When Do You Need an Architect for a Renovation?

Consider opening the wall between your kitchen and dining room. It might seem like a relatively simple change, but that wall could be supporting the floor above it. Removing it may require a structural engineer, new support beams, and detailed construction drawings.

The same is true when adding a bathroom to a space that wasn't designed for one. Plumbing, ventilation, electrical systems, and framing all need to work together.

Projects that commonly benefit from an architect include:

  • Home additions and second- or third-story expansions
  • Major kitchen renovations that change the floor plan
  • Whole-home remodeling projects
  • Removing or relocating load-bearing walls
  • Converting unfinished attics or basements into living space
  • Renovations involving complex structural or historic preservation requirements

Architect vs. Builder vs. Design-Build Firm: What's the Difference?

Hiring an architect: An independent architect develops the design, prepares drawings, and may help you navigate approvals and select a contractor. This traditional design-bid-build approach allows you to work with an architect separately from the construction team and seek competitive bids once the drawings are complete.

The potential challenge is cost alignment. A design may need revisions if contractor bids come back higher than expected.

Hiring a builder: For projects that don't require extensive design work, a remodeling contractor may be all you need. Some builders also coordinate with engineers or draftspersons when permit drawings are required.

This approach can work well for smaller renovations, but larger projects may benefit from more comprehensive architectural planning.

Hiring a design-build firm: A design-build firm brings architecture, design, and construction together under one team. The architect and builder collaborate from the beginning, allowing construction costs, structural considerations, and scheduling to inform the design as it develops.

For homeowners planning a major renovation, this approach provides one point of coordination throughout the project.

If you're comparing firms, our guide to choosing a DC architecture firm covers what to look for before making your decision.

What Does an Architect Look at Before Starting a Renovation?

Before an architect begins developing a floor plan, they need to understand the house that's already standing.

This is particularly important in older DC-area homes, where previous renovations, aging systems, and original construction methods can affect what is possible.

Structural Conditions

An architect starts by evaluating the home's existing structure. Where are the load-bearing walls? How are the floors supported? What changes have previous owners made?

In a Capitol Hill rowhouse built in the early 1900s, for example, the structure may include shared masonry party walls, wood floor joists, and framing that has been modified over several generations.

An older rear addition or enclosed sleeping porch may have been built differently from the original home. Before expanding above that space, the design team needs to determine whether the existing structure can support the additional weight.

Some conditions can be evaluated during the initial walkthrough. Others require further investigation or a structural engineer's assessment before the design can move forward.

Plumbing, Electrical, and HVAC Systems

A renovation may also require changes to systems that are hidden behind walls and ceilings.

An architect considers where plumbing stacks run, whether the electrical panel has enough capacity, and how the existing heating and cooling system will serve the renovated space.

These details can have a significant impact on the layout and budget. Moving a bathroom across the house, for example, may require extensive plumbing changes that make one design option considerably more expensive than another.

Stairs, Natural Light, and How You Use Your Home

A good renovation should improve how your home functions day to day.

An architect looks at how people move between rooms, where natural light enters, and whether the proposed layout creates new problems.

Staircases are a common challenge in older Washington, DC homes. Many original stairs are narrower or steeper than current building codes allow. Adding another story or reconfiguring the second floor may require changes to the staircase, which can affect several surrounding rooms.

These are the kinds of considerations that are easier to address during design than after construction begins.

For a closer look at how plans develop, see our guide to architectural design and the design process.

How DC-Area Zoning and Permits Affect Your Renovation

Even when your home can structurally support a renovation, local regulations may limit what you can build.

Washington, DC, Montgomery County, Arlington, and Fairfax County each have their own zoning and permitting requirements. Understanding which rules apply to your property is an important part of early planning.

Zoning and Home Additions

Zoning regulations determine where you can build, how tall your home can be, and how much space you can add.

In Washington, DC, these rules can affect the depth of a rear addition, the height of a third-story expansion, and the amount of floor area permitted on your lot.

For example, certain DC residential zones restrict how far a rear addition can extend beyond an adjoining property. Floor Area Ratio, or FAR, may also limit the amount of floor space allowed relative to the lot size.

The specific requirements depend on your property's zoning designation, existing conditions, and proposed work.

An architect familiar with DC zoning can evaluate these restrictions before you invest in a design that may not be permitted.

Building Permits

Most major renovations require building permits, and the plans submitted must demonstrate compliance with applicable building codes.

In Washington, DC, permits are handled by the Department of Buildings (DOB). Montgomery County projects go through the Department of Permitting Services (DPS), while Arlington and Fairfax County have their own permitting processes.

Structural modifications, additions, and changes to plumbing or electrical systems may require additional documentation and reviews.

Identifying these requirements early helps the design team prepare the appropriate drawings and anticipate potential delays.

Do You Need an Architect for a Historic District Renovation?

In Washington, DC, work that requires a building permit and affects the exterior appearance of a historic property generally requires preservation review. This can apply to work on designated properties and homes in historic districts such as Capitol Hill, Georgetown, Dupont Circle, and Cleveland Park.

The Historic Preservation Office (HPO) can review many smaller projects, while substantial alterations and larger projects typically go before the Historic Preservation Review Board (HPRB). In the Georgetown Historic District, the Old Georgetown Board reviews most proposed exterior work and makes recommendations to the U.S. Commission of Fine Arts. 

Visibility from the street can shape the design of an addition or changes to the roofline. Work at the rear of the house can also require review.

For example, a homeowner adding a third story to a historic rowhouse may need to set the addition back from the original facade to reduce its visibility from the street. A rear addition may also require adjustments to its height, materials, or overall design.

Interior renovations generally face fewer historic preservation restrictions, although building permits and other code requirements still apply.

Working with an architect experienced in historic properties can help you understand these considerations before finalizing your plans.

Our guide to historic renovations in DC, Northern Virginia, and Maryland explores the review process and what homeowners can expect.

How Much Does Architectural Design Cost, and How Long Does It Take?

Architectural design fees depend on the size and complexity of your renovation, the services involved, and whether additional engineering or regulatory review is needed.

At Landis, design fees have typically ranged from 10% to 12% of estimated construction costs, with additional costs possible for engineering, zoning, or historic review. See our Pricing & Finance Solutions page for details. 

The design timeline also varies by project. Initial planning, design development, construction drawings, permitting, and any required historic review all contribute to the overall schedule.

For larger renovations, the process can take several months before construction begins.

Although that may seem like a long lead time, thorough planning helps identify structural concerns, resolve design questions, and align the project with the budget before work starts.

It's also when changes are generally easier and less expensive to make. Moving a wall on a drawing is considerably simpler than moving it after framing is underway.

Planning Your Renovation with Landis

At Landis Architects | Builders, we've been designing and renovating homes across Washington, DC, Maryland, and Northern Virginia since 1990. Our architects, interior designers, and construction team work together from the earliest planning stages, bringing design, budgeting, permitting, and construction expertise into one coordinated process.

Whether you're considering an addition to a Capitol Hill rowhouse, a whole-home renovation in Bethesda, or updates to a historic property in Georgetown, we can help you understand what's possible and what your project will require.

Start the conversation with our team to discuss what’s possible for your home. 

‍

Thank you! Your submission has been received!
Oops! Something went wrong while submitting the form.
Prefer to talk to one of our team members first?
(202) 726-3777
CALL NOW